W4D SSD1351 Template

For all SSD1351 based displays.

Tested with this: https://www.waveshare.com/product/displays/oled/oled-3/1.5inch-rgb-oled-module.htm

How to use this template

Replace User_Setup.h in your Squareline export folder.

User_Setup.h is in the following directory:

your_squareline_export_folder/libraries/TFT_eSPI/User_Setup.h

PINS

Display - Pico
VCC - 3V3
GND - GND
DIN - GP19
CLK - GP18
CS - GP17
DC - GP20
RST - GP21
BL - GP13

Arduino project for SquareLine Studio with TFT_eSPI

1. Open the .ino file in Arduino
2. Go to File/Preferences and set Sketchbook location to the path of your UI project (where this README is located)
3. Go to libraries/TFT_eSPI and replace User_Setup.h with the one in this repository.
4. Choose Raspberry Pi Pico (Arduino mbed) as board and (probably) UF2 as port. Later choose usbmodeXXXX for mac and COMxx for PC.
5. Upload the project