trying out both cores - 1 for ui and 0 for sound - sound not working yet

soundcube-firmware/soundcube-firmware.ino

@@ -13,6 +13,8 @@
 #include "codec.h"
 #include "wavestream.h"
 
+bool core1_separate_stack = true;
+
 #define HAPTIC 1
 #define AURAL 1
 #define UI_SAMPLERATE 22050
@@ -65,10 +67,13 @@ volatile bool buttonChanged = false;
 bool ui_click = false;
 bool ui_beep = false;
 bool amp = false;
-bool streams_loaded = false;
+volatile bool streams_loaded = false;
 bool speakerToggle = false;
 bool sd_card_detected = false;
 
+volatile bool codec_ready = false;
+volatile bool config_loaded = false;
+
 bool buttons[16] = {false};
 int buttonsDir[16] = {0};
 
@@ -155,7 +160,6 @@ size_t tape_write = 0;
 
 void codec_transmit() {
   for(int i = 0; i < count; i++){
-    int j = active % NSTREAMS;
     for(int k = 0; k < NSTREAMS; k++){
       int16_t sample = 0;
       sample = stream[k].get();
@@ -320,14 +324,11 @@ void setup() {
 
   i2s.setFrequency(48000);
 
-  SPI1.setSCK(10);
-  SPI1.setTX(11);
-  SPI1.begin();
+  pinMode(19, OUTPUT); // MCLK enable
+  digitalWrite(19, HIGH); // enable MCLK
 
-  dac.begin();
-
-  FastLED.addLeds<NEOPIXEL, 4>(edge_leds, 11);
-  FastLED.addLeds<NEOPIXEL, 5>(ui_leds, 74);
+  pinMode(20, OUTPUT); // CODEC reset (enable)
+  digitalWrite(20, HIGH);
 
   pinMode(12, OUTPUT);
   pinMode(13, OUTPUT);
@@ -348,6 +349,72 @@ void setup() {
     load_ui_sounds("/ui/click.wav", ui_click_snd, click_length);
     load_ui_sounds("/ui/beep.wav", ui_beep_snd, beep_length);
   }
+  config_loaded = true;
+  
+  pinMode(6, OUTPUT);  // Vibration Motor
+  pinMode(7, OUTPUT);  // UI Amp Enable
+
+  ui_snd.onTransmit(pwm_audio_callback);
+  ui_snd.begin(UI_SAMPLERATE);
+
+  digitalWrite(7, LOW); // UI amp off
+
+  while(!codec_ready){
+    delay(5);
+  }
+
+  //i2s.onTransmit(codec_transmit);
+  //i2s.onReceive(codec_receive);
+
+  i2s.setDOUT(15);
+  i2s.setDIN(14);
+  i2s.setBCLK(16); // Note: LRCLK = BCLK + 1
+  i2s.setMCLK(18);
+  i2s.setMCLKmult(512); // 256 = 12.288.000Hz 512 = 25Mhz
+
+  i2s.swapClocks();
+  i2s.setBitsPerSample(16);
+
+  //i2s.setBuffers(6, BUFFERSIZE * sizeof(int16_t) / sizeof(uint32_t));
+
+  if(sdInitialized) {
+    streams_loaded = load_samples();
+  }
+
+  if(streams_loaded) {
+    for(int i = 0; i < NSTREAMS; i++){
+      samples[i].file = &stream[i];
+    }
+  }
+
+  if(!i2s.begin(48000)){
+    Serial.println("I2S error!");
+    while(100);
+  }
+  Serial.println("I2S OK");
+
+  digitalWrite(6, HIGH);
+  delay(25);
+  digitalWrite(6, LOW);
+  delay(50);
+  digitalWrite(6, HIGH);
+  delay(25);
+  digitalWrite(6, LOW);
+}
+
+void setup1(){
+  while(!config_loaded){
+    delay(5);
+  }
+
+  SPI1.setSCK(10);
+  SPI1.setTX(11);
+  SPI1.begin();
+
+  dac.begin();
+
+  FastLED.addLeds<NEOPIXEL, 4>(edge_leds, 11);
+  FastLED.addLeds<NEOPIXEL, 5>(ui_leds, 74);
 
   Serial.println("INIT WIRE");
   Wire1.setSDA(2);
@@ -371,58 +438,9 @@ void setup() {
   ENC.setDirection(AS5600_CLOCK_WISE);
   ENC.resetCumulativePosition();
   
-  pinMode(6, OUTPUT);  // Vibration Motor
-  pinMode(7, OUTPUT);  // UI Amp Enable
-
-  ui_snd.onTransmit(pwm_audio_callback);
-  ui_snd.begin(UI_SAMPLERATE);
-
-  digitalWrite(7, LOW); // UI amp off
-
-  pinMode(19, OUTPUT); // MCLK enable
-  digitalWrite(19, HIGH); // enable MCLK
-
-  pinMode(20, OUTPUT); // CODEC reset
-  digitalWrite(20, HIGH);
-
   codec.begin(&Wire1);
-
-  i2s.onTransmit(codec_transmit);
-  i2s.onReceive(codec_receive);
-
-  i2s.setDOUT(15);
-  i2s.setDIN(14);
-  i2s.setBCLK(16); // Note: LRCLK = BCLK + 1
-  i2s.setMCLK(18);
-  i2s.setMCLKmult(512); // 256 = 12.288.000Hz 512 = 25Mhz
-
-  i2s.swapClocks();
-  i2s.setBitsPerSample(16);
-
-  i2s.setBuffers(6, BUFFERSIZE * sizeof(int16_t) / sizeof(uint32_t));
-
-  if(!i2s.begin(48000)){
-    Serial.println("I2S error!");
-    while(100);
-  }
-
-  if(sdInitialized) {
-    streams_loaded = load_samples();
-  }
-
-  if(streams_loaded) {
-    for(int i = 0; i < NSTREAMS; i++){
-      samples[i].file = &stream[i];
-    }
-  }
-
-  digitalWrite(6, HIGH);
-  delay(25);
-  digitalWrite(6, LOW);
-  delay(50);
-  digitalWrite(6, HIGH);
-  delay(25);
-  digitalWrite(6, LOW);
+  delay(100);
+  codec_ready = true;
 }
 
 uint32_t last = 0;
@@ -435,7 +453,7 @@ int32_t position_last = 0;
 int16_t encdelta_raw = 0;
 int16_t encdeltadiv = 512;
 
-void loop() {
+void loop1() {
   position = ENC.getCumulativePosition();
   angle = ENC.readAngle();
   encdelta_raw += (position - position_last);
@@ -669,11 +687,6 @@ void loop() {
   // }
 
   FastLED.show();
-  if(streams_loaded) {
-    for(int i = 0; i < NSTREAMS; i++){
-      stream[i].stream();
-    }
-  }
 
   if(buttonChanged){
     for(int i = 0; i < 16; i++){
@@ -681,13 +694,33 @@ void loop() {
     }
   }
 
-  if(i2s.getOverflow()) Serial.println("overflow");
-  if(i2s.getUnderflow()) Serial.println("underflow");
-
   //delay(20); // wait 1ms
   bar_old = bar;
   vibration.update();
   position_last = position;
 }
 
+void loop(){
+  int16_t l, r;
+  i2s.read16(&l, &r);
+
+  for(int k = 0; k < NSTREAMS; k++){
+    int16_t sample_l = 0;
+    int16_t sample_r = 0;
+    sample_l = stream[k].get();
+    sample_r = stream[k].get();
+    l += sample_l >> 2;
+    r += sample_r >> 2;
+  }
+
+  i2s.write16(l, r);
+
+  if(streams_loaded) {
+    for(int i = 0; i < NSTREAMS; i++){
+      stream[i].stream();
+    }
+  }
+
+}
+