# Soundcube Firmware

## Install new firmware

1. Go to [Releases](https://code.w4d.dev/W4D/soundcube-firmware/releases)
2. Download latest `soundcube-firmware.ino.uf2` file
3. On your Soundcube Board: Press and hold the outer most white button as seen from the USB-C socket
4. While holding the button press the inner most white button once
	- the board will go into bootloader mode and appear as USB thumb drive
6. Copy the `soundcube-firmware.ino.uf2` file to the thumb drive and wait for the board to restart


## SD Card contents


```
config.txt
sound/
  ├─ 1.wav
  ├─ 2.wav
  ├─ 3.wav
  ├─ 4.wav
  ├─ 5.wav
  ├─ 6.wav
  ├─ 7.wav
  ├─ 8.wav
ui/
  ├─ click.wav
  ├─ beep.wav

```

### config.txt

Json formatted config file. For now only edge led color working.

```
{
    "boxid":"",
    "edge": {
        "color":{
            "idle":{
                "r":50,
                "g":0,
                "b":50
            },
            "active":{
                "r":0,
                "g":50,
                "b":50
            }
        }
    },
    "ring": {
        "color":{
            "idle":{
                "r":0,
                "g":50,
                "b":50
            },
            "active":{
                "r":0,
                "g":80,
                "b":50
            }
        }
    }
}
```

## Sound

### UI

There are two UI sounds - `click.wav` and `beep.wav`.

- `click.wav` is played when a button is pressed other than the select button
- `beep.wav` is played when the rotary encoder select button is pressed

Put these files in the subfolder `ui` on the SD card.

#### Wave File Format for UI Sounds

`click.wav` needs to be **22050Hz (22kHz) 16bit Mono**


### Audio Out or Speakers

Put all sounds into the `/sound` subfolder. Name them `1.wav, 2.wav, 3.wav...`


#### Wave File Format for Audio Out and Speakers

Export all sounds as **48000Hz (48kHz) 16bit Stereo**.


### Audacity

You can use Audacity to export all soundfiles to WAV format.

Download it here [Github](https://github.com/audacity/audacity/releases)

1. Load file into Audacity
2. Select Track
3. File -> Export Audio

#### Format options in Audacity

**Audio Out**

- WAV(Microsoft)
- Chanels: Stereo
- Samplerate: 48000Hz
- Encoding: Signed 16-bit PCM

**UI**

- WAV(Microsoft)
- Channels: Mono
- Samplerate: 22050Hz
- Encoding: Signed 16-bit PCM

----

## Code something yourself

1. Download [Arduino IDE](https://www.arduino.cc/en/software/)
2. Install and open "Preferences"
3. Follow these [instructions](https://github.com/earlephilhower/arduino-pico?tab=readme-ov-file#installation)
	- No need to change checkboxes, only paste the URL and hit OK.
4. Install **Raspberry Pi Pico** boards ([HowTo install boards](https://support.arduino.cc/hc/en-us/articles/360016119519-Add-boards-to-Arduino-IDE))
5. Install libraries ([HowTo install libraries](https://docs.arduino.cc/software/ide-v2/tutorials/ide-v2-installing-a-library/)): Adafruit Neopixel, AS5600 (Rob Tillaart), TCA9555 (Rob Tillaart)
6. Choose **Generic RP2350** as board and the correct port (Mac: /dev/cu.usbmodemXXXX, PC: COMXX Serial Port)
7. Go to **Tools -> Flash Size** and choose **16MB (no FS)**
8. Make your changes in the code
9. Hit Upload Button (Arduino IDE compiles and uploads it automatically)