#pragma once
#include <cstdint>
#include <Wire.h>



class TLV320AIC3204_Settings{

  public:
    TwoWire *wire;
    uint8_t i2cAddress = 0x18;

    ClockSettings1 clock_settings_1 = ClockSettings1(i2cAddress, wire);

};

class TLV320AIC3204{

  public:
    TLV320AIC3204(){settings.wire = &Wire;}
    TLV320AIC3204(TwoWire *wire) {settings.wire = wire;}

    void begin(){};
    void begin(TwoWire *wire) {settings.wire = wire;}
    void begin(uint8_t i2cAddress, TwoWire *wire) {
      settings.i2cAddress = i2cAddress;
      settings.wire = wire;
      }
    
    void softReset(){}; // 0x00 0x01
    void hardReset(){}; // reset pin

    void powerUp(){};   // power up

    void setClockMultiplexer(ClockSettings1::PLLRange range, ClockSettings1::PLLInputClock pll_input, ClockSettings1::CodecInputClock codec_input) {
      settings.clock_settings_1.pll_range = range;
      settings.clock_settings_1.pll_input_clock = pll_input;
      settings.clock_settings_1.codec_input_clock = codec_input;
      settings.clock_settings_1.write();
    }

    void setADCParameters(int nadc, int madc, int osr);
    void setDACParameters(int madc, int nadc, int osr);

    void setMicPgaGain(int gainLeft, int gainRight); // 0 - 47.5dB in 0.5dB steps
    void setMicPgaGainL(int gain);
    void setMicPgaGainR(int gain);
    
    void setLineOutVolume(int volumeLeft, int volumeRight);
    void setLineOutVolumeL(int volume);
    void setLineOutVolumeR(int volume);

  private:

    TLV320AIC3204_Settings settings;




};


/*
  // GENERAL
  cw(0x00, 0x00); // select page 0
  cw(0x01, 0x01); // soft reset
  cw(0x1b, 0b00000000); // select I2S with 16 bit word length
  cw(0x1d, 0b00000000); // disable loopback

  // POWER and CM
  cw(0x00, 0x01); // select page 1
  cw(0x01, 0b00001000); // disable weak (crude) AVdd connection to DVdd
  cw(0x02, 0b00000001); // enable internal AVdd LDO and enable analog blocks
  cw(0x09, 0b00001100); // power up LOL, LOR, power down MAL, MAR, HPL, HPR
  cw(0x0a, 0b00001000); // set full chip CM to 0.75V
  cw(0x47, 0b00110011); // analog input quick charge time 1.6ms

  // ROUTING
  cw(0x00, 0x01); // select page 1
  cw(0x34, 0b10000000); // LEFT MICPGA P route IN1L to LEFT_P with 40k input impedance
  //cw(0x36, 0b11000000); // LEFT MICPGA M route CM to LEFT_M with 20k input impedance
  //cw(0x36, 0b00000011); // LEFT MICPGA M route CM to LEFT_M with 20k input impedance
  cw(0x37, 0b10000000); // RIGHT MICPGA P route IN1R to RIGHT_P with 20k input impedance
  //cw(0x39, 0b11000000); // RIGHT MICPGA M route CM to RIGHT_M with 20k input impedance
  //cw(0x39, 0b00000011); // RIGHT MICPGA M route CM to RIGHT_M with 20k input impedance
  cw(0x3a, 0b00111100); // connect IN2, IN3 weakly to CM

  // GAIN
  cw(0x00, 0x01); // select page 1
  cw(0x3b, 0b00000000); // unmute left MICPGA, set gain to 0db
  cw(0x3c, 0b00000000); // unmute right MICPGA, set gain to 0db

  // VOLUME
  cw(0x00, 0x01); // select page 1
  cw(0x16, 0b01110101); // MUTE IN1L to HPL
  cw(0x17, 0b01110101); // MUTE IN1R to HPR

  // ADC
  cw(0x00, 0x00); // select page 0
  cw(0x12, 0x81); // NADC 1
  cw(0x13, 0x82); // MADC 2
  cw(0x14, 0b10000000); // OSR ADC 128
  //cw(0x14, 0b01000000); // OSR ADC 128
  cw(0x3d, 0b00000001); // ADC PRB_R3 = 11, PRB_R2 = 10, PRB_R1 = 01

  cw(0x00, 0x01); // select page 1
  cw(0x3d, 0b00000000); // ADC PTM_R4

  // DAC
  cw(0x00, 0x00); // select page 0
  cw(0x0b, 0x81); // NDAC 1
  cw(0x0c, 0x82); // MDAC 2
  cw(0x0d, 0x00); // OSR DAC 128
  cw(0x0e, 0x80); // OSR DAC 128
  cw(0x1b, 0b00000000); // word length 16bits
  cw(0x3c, 0b00000001); // PRB_P3

  cw(0x00, 0x01); // select page 1
  cw(0x7b, 0b00000001); // set REF charging time to 40ms
  
  // ROUTING
  cw(0x00, 0x01); // select page 1
  cw(0x0e, 0b00001000); // left DAC reconstruction filter routed to LOL
  cw(0x0f, 0b00001000); // right DAC reconstruction filter routed to LOR
  cw(0x03, 0b00000000); // DAC PTM_P3/4
  cw(0x04, 0b00000000); // DAC PTM_P3/4

  // LO GAIN
  cw(0x00, 0x01);
  cw(0x12, 0b00000001); // LOL gain 0dB
  cw(0x13, 0b00000001); // LOR gain 0dB

  // POWER UP
  // ADC
  cw(0x00, 0x00); // select page 0
  cw(0x51, 0b11000000); // power up ADC
  cw(0x52, 0b00000000); // unmute ADC
  cw(0x3f, 0b11010100); // power up and route left digital audio to left dac channel and right to right
  cw(0x40, 0x00); // unmute DAC digital volume

  // DAC VOLUME 0b00000000 = 0dB, 10000001 = -63.5dB, 0b00110000 = +24dB
  cw(0x00, 0x00); // select page 0
  cw(0x41, 0b11111001); // LEFT 
  cw(0x42, 0b11111001); // RIGHT
  
  // ADC VOLUME 0b1101000 = -12dB, 0b00000000 = 0dB, 0b0101000 = +20dB
  cw(0x00, 0x00); // select page 0
  cw(0x53, 0b01110000); // LEFT
  cw(0x54, 0b01110000); // RIGHT

*/