sampler at 80 percent

soundcube-firmware/soundcube-firmware.ino

@@ -35,8 +35,8 @@ DAC8552 dac(9, &SPI1);
 
 PWMAudio ui_snd(8);
 
-enum STATE {IDLE, BANK_A, BANK_B, BANK_C, BANK_D, CTEMPO};
-STATE state = IDLE;
+enum STATE {BANK, SAMPLE, SEQUENCE, CTEMPO};
+STATE state = BANK;
 
 //enum BUTTON {CVINL, CVINR, INL, INR, OUTR, OUTL, CVOUTR, CVOUTL, RIGHT, LEFT, SELECT, DEBUG1, DEBUG2, DEBUG3};
 enum BUTTON {MODE, LOOP, INL, INR, OUTR, OUTL, TEMPO, RESET, BACK, POWER, SELECT, DEBUG1, DEBUG2, DEBUG3};
@@ -45,9 +45,15 @@ int lut_ring_cw[48] = {39,38,37,36,35,34,33,32,31,30,29,28,27,26,25,24,23,22,21,
 int lut_ring_ccw[48] = {40,41,42,43,44,45,46,47,48,49,50,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39};
 int lut_matrix[13] = {56,55,57,58,59,62,61,60,63,64,65,67,66};
 
+int lut_banks[4] = {56,55,67,66};
+int lut_samples[4] = {62,58,60,64};
+
 int active = 0;
 int active_led_ring = 0;
 
+int selected_bank = 0;
+int selected_sample = 0;
+
 uint32_t lastTime = 0;
 int32_t position = 0;
 
@@ -424,27 +430,33 @@ int bar_old = -1;
 int set_bar = 0;
 int16_t angle = 0;
 int32_t position_last = 0;
+
 int16_t encdelta_raw = 0;
-int16_t encdeltadiv = 1;
+int16_t encdeltadiv = 512;
 
 void loop() {
   position = ENC.getCumulativePosition();
   angle = ENC.readAngle();
   encdelta_raw += (position - position_last);
 
+  // Serial.print(encdelta_raw);
+  // Serial.print(" \t");
+
   int encdelta = 0;
   if(abs(encdelta_raw) > encdeltadiv) {
     encdelta = encdelta_raw > 0 ? 1 : -1;
     encdelta_raw = 0;
   }
 
-  Serial.print(angle);
-  Serial.print(" \t");
-  Serial.print(position);
-  Serial.print(" \t");
-  Serial.print(encdelta_raw);
-  Serial.print(" \t");
-  Serial.println(encdelta);
+  // Serial.print(angle);
+  // Serial.print(" \t");
+  // Serial.print(position);
+  // Serial.print(" \t");
+  // Serial.print(position_last);
+  // Serial.print(" \t");
+  // Serial.print(encdelta_raw);
+  // Serial.print(" \t");
+  // Serial.println(encdelta);
 
   uint32_t delta_bpm = floor((60000 / config.bpm) / 16);
 
@@ -504,32 +516,55 @@ void loop() {
       ui_click = true;
     }
 
-    if(buttons[TEMPO]){
+    if(buttons[TEMPO] && buttonDown){
       state = CTEMPO;
     }
 
+    if(buttons[BACK] && buttonDown){
+    }
+
     switch(state){
-      case IDLE:
-        break;
-      case BANK_A:
+      case BANK:
+        encdeltadiv = 512;
+        encdelta_raw = 0;
+        encdelta = 0;
         if(buttons[SELECT] && buttonDown){
-          int n = steps[set_bar].len;
-          steps[set_bar].samples[n] = &samples[0];
-          steps[set_bar].len = (steps[set_bar].len + 1) % 4;
+          state = SAMPLE;
         }
         break;
-      case BANK_B:
+      case SAMPLE:
+        encdeltadiv = 512;
+        encdelta_raw = 0;
+        encdelta = 0;
+        if(buttons[SELECT] && buttonDown){
+          state = SEQUENCE;
+        }
+        if(buttons[BACK] && buttonDown){
+          state = BANK;
+        }
         break;
-      case BANK_C:
-        break;
-      case BANK_D:
+      case SEQUENCE:
+        encdeltadiv = 256;
+        encdelta_raw = 0;
+        encdelta = 0;
+        if(buttons[SELECT] && buttonDown){
+          int n = steps[set_bar].len;
+          steps[set_bar].samples[n] = &samples[selected_bank*4 + selected_sample];
+          steps[set_bar].len = (steps[set_bar].len + 1) % 4;
+        }
+        if(buttons[BACK] && buttonDown){
+          state = SAMPLE;
+        }
         break;
       case CTEMPO:
         encdeltadiv = 64;
         encdelta_raw = 0;
         encdelta = 0;
         if(buttons[SELECT] && buttonDown){
-          state = IDLE;            
+          state = BANK;      
+        }
+        if(buttons[BACK] && buttonDown){
+          state = BANK;
         }
         break;
     }
@@ -566,19 +601,23 @@ void loop() {
     buttonChanged = false;
   }
 
-  if(position < 0) position += 4096;
+//  if(position < 0) position += 4096;
  
   switch(state){
-    case IDLE:
+    case BANK:
+      selected_bank += encdelta;
+      if(selected_bank == 4) selected_bank = 0;
+      if(selected_bank == -1) selected_bank = 3;
       break;
-    case BANK_A:
-      set_bar = (position / 256) % 16;
+    case SAMPLE:
+      selected_sample += encdelta;
+      if(selected_sample == 4) selected_sample = 0;
+      if(selected_sample == -1) selected_sample = 3;
       break;
-    case BANK_B:
-      break;
-    case BANK_C:
-      break;
-    case BANK_D:
+    case SEQUENCE:
+      set_bar += encdelta;
+      if(set_bar == 16) set_bar = 0;
+      if(set_bar == -1) set_bar = 15;
       break;
     case CTEMPO:
       config.bpm += encdelta;
@@ -591,14 +630,14 @@ void loop() {
   //dac.setValue(0, dactest ? 0 : sin((float)millis() / 100.0f) * 32768 + 32768);
 
   // empty LED matrix
-  for (int i = 0; i < 13; i++) {
-    ui_leds[lut_matrix[i]] = CRGB(0, 0, 0);
-    if(stream[i % NSTREAMS].isPlaying()) ui_leds[lut_matrix[i % NSTREAMS]] = CRGB(0, 50, 0);
+  for (int i = 0; i < 4; i++) {
+    ui_leds[lut_banks[i]] = CRGB(0, 0, 0);
+    ui_leds[lut_samples[i]] = CRGB(0,0,0);
   }
   
   // set active LED matrix LED
-  ui_leds[lut_matrix[active]] = CRGB(100, 100, 100);
-
+  ui_leds[lut_banks[selected_bank]] = CRGB(100, 50, 50);
+  ui_leds[lut_samples[selected_sample]] = CRGB(100, 0, 50);
 
   for(int i = 0; i < 48; i++){
     int step = floor(i/3);
@@ -649,3 +688,5 @@ void loop() {
   vibration.update();
   position_last = position;
 }
+
+